Adjusting brake pad measurements manually

You can adjust brake pad measurement results manually. Use this when the measured value or the measurement position is wrong.

Adjusting a measurement

1. Tap the wheel you want to adjust to open the measurement result screen.
2. Tap Edit at the bottom of the measurement result screen.
3. The edit screen opens. You can change the Measured Value and Measurement Notes directly on this screen.
4. To correct the measurement position itself, tap Adjust in the upper right of the image.
   • Even when a measurement has failed, if the message asks you to adjust the position manually or retake the photo, you can tap Adjust and measure manually.
5. The Adjust Measurement Position screen opens. Drag the endpoints of the green measurement line (top and bottom) to match the correct range of the brake pad (friction material).
   • The dotted lines shown at the endpoints indicate the measurement range.
   • Tap the back arrow in the upper left to return without applying your changes.
6. When you have finished adjusting the position, tap Confirm. A message appears telling you that the existing measurement data will be overwritten. Check it, then tap OK.
7. When the completion message appears, the measured value has been updated. The new value appears on the measurement result screen.